Showing posts with label Baby. Show all posts
Showing posts with label Baby. Show all posts

Wednesday, December 19, 2012

Baby Reindeer Footprint Craft


Of course, this craft was inspired by Pinterest! 
This craft took no time to create and will be a cherished decoration for years to come. 


Done on a small canvas using acrylic paint and Sharpie paint pens.  

Monday, July 9, 2012

Nursery Door Sign





One of the last projects for Avery's nursery was a sign for the door.  I knew I wanted to do something in pink & grey.  I also knew I wanted an A or her name on it and I have loved the saying above for a while now.  Lots of people have this sort of sign on their front door.  But, I'm not too comfortable with announcing that I have a baby in my house so on the nursery door it goes!


Materials: 
plywood (I bought mine at JoAnn's for $1, I think it's 12x12)
acrylic paint
paint brush
Mod Podge
scrapbook paper
cricut or letter stickers
ribbon


Directions: 
Start with the plain piece of plywood

This is how thin the plywood is. 




I painted the back of the board grey.  I applied 2 coats and finished it off with a layer of Mod Podge. 



After that, I gathered my scrapbook paper.  I put a larger piece of the grey polka dot on the top of the wood and a smaller piece of the pink polka dots on the bottom.  I measured the paper, trimmed it and adhered it with Mod Podge to the unpainted side of the sign.  Make sure when using Mod Podge, that there aren't any bubbles under the paper.  



Next, I used my Cricut to cut the letters for the "You Wake Her, You Take Her" portion of the sign.  I adhered the letters with Mod Podge.  Make sure to center them first before you glue them on.  After that, I used a piece of chip board for the A, which was already cut.  I covered it with grey paper and glued it on top of the pink center.   Once the bottom layers of Mod Podge are dry, apply a layer or two to the top to seal it.  









To finish it off, I added a piece of white ribbon to separate the pink & grey.  I hot glued the ribbon to the back of the sign to keep it straight.  I also added ribbon to the top in order to hang it from a hook.





Tuesday, July 3, 2012

Wipes Case Band

I've had this tutorial pinned for about a year now.  I knew as soon as we had a little one on the way, it was something I wanted to make.  I don't have a wipes warmer for the nursery.  I plan on using a regular wipes case and refilling it when it runs out.  Of course, I want the case to match the nursery. So, I decided on a grey case with pink fabric flowers attached.  I was very pleased with how easy this was to make.  It looks fabulous in the nursery and is soo much better then the normal case.  

So, head on over to Less Cake More Frosting for the tutorial. And if you're looking for fabric flower tutorials, I found a similar one here.  
PS.  I just hot glued the flowers onto the case, no sewing involved! 




Friday, June 29, 2012

DIY Bow Board

Here is another project from Avery's nursery.  I already made a bow holder, but that didn't fit all of the flowers and bows she has.  So, I decided to make a bow board to hang on the back of her bedroom door.  

Materials:
1 canvas (mine was 16x20)
Fabric to cover canvas
staple gun
ribbon
spray adhesive
Fabric Pen


Directions: 
I started with my canvas and fabric. 


I ironed my fabric to get all of the creases out. 



Next, I laid my fabric on the ground and put the canvas on top.  




I left about 1 1/2 to 2 inches around all of the sides of the canvas and cut the extra fabric. 





Then, get your spray adhesive and spray the entire canvas front with it.  





Place your fabric on top of the canvas.  Smooth out any bumps or lines. 



Next, use your staple gun to staple the fabric on the back of the canvas.  I made sure to pull tight enough to keep the fabric smooth.  Continue doing that around all four sides of the canvas. 



Now, your board is done.  All you need to do now is create a place to hang the bows.  



I measured the length of my canvas (after deciding which way I wanted it to hang on the door).  



I marked the distance I wanted to put each piece of ribbon.  I think I did mine about 3 inches apart.  The mark below is the width of the ribbon, so I knew exactly where to put it. 



Cut the amount of ribbon you'll need.  I measured mine about 18 inches and cut 5 pieces.

After that, staple the ribbon to the back of the canvas on both ends.  



Trim off any excess ribbon or fabric.  



Ta da- you have your bow board.  You can hang it with ribbon or place it on hooks, like I did.  

Fill it with bows and you're good to go! 








Tuesday, June 26, 2012

DIY Fabric Pom Poms

After spending lots of time working on Avery's nursery, things were finally coming together.  The room was painted, the crib was set up, the decorations were coming in. One of my last DIY projects were these fabric pom poms.  Of course, these were Pinspired.  But most of the tutorials used lanterns and hot glue.  I couldn't imagine hot gluing every one of the fabric circles into these balls, so I tried it a different way.  I used styrofoam balls as my base and pinned in the fabric.  It was a simple but LONG process.  Now that it's said and done, I would spend countless hours making these again.  They really bring the nursery together, they are without a doubt my favorite project in her room.  


Materials: 
Styrofoam Balls (I used 6 inch for the light pink and 8 inch for the dark pink
Fabric (about 4 yards for the 2 light pink and 3 yards for the dark pink)
Lots and lots of sewing pins (I used over 500)
Ribbon
Scissors
Fabric Pen

Directions: 
1. Iron fabric to get all of the creases out. This is optional, but it makes the tracing and cutting much easier.  

2.  Trace your circles.  I used a spool of ribbon as my tracer and a disappearing fabric marker to make the circles.  


3.  Cut out the circles.  I had to take breaks while doing this.  I did a yard at a time.  


4.  To make the puffy circles for the poms, first fold the circle in half.  


5.  Then fold the fabric in half one more time.  


6.  Now, take a sewing pin and put it through the corner of the fabric.  



7.  Pin it into the styrofoam ball.  Once it's in, fluff it out a bit.  I pinned them in groups of 4 to make sure the area was covered and all pieces were fluffed out.  




8.  Continue until the entire ball is covered.  It took me about 3 nights to finish all of the balls.  I probably spent 2-3 hours each night working on them.  




To hang them up, I just used grossgrain ribbon, sewing pins and a tack. I cut the ribbon the length I wanted to hang them from the ceiling.  Then I pinned one end of the ribbon into the styrofoam, I used about 10 pins to keep it in.  Then, I took a clear tack and stuck it into the ceiling.  I used 2 tacks for the bigger ball.  I will probably switch to nails eventually, but I did this on my own and didn't want to be 8 months pregnant, standing on a chair trying to hammer something into the ceiling.  I already caught enough flack for putting them up myself with tacks.  



Do you like this project?  Share it with your friends! 






Thursday, June 21, 2012

Daddy Survival Kit & Hospital Survival Kit

I wanted to do something special for hubs for Father's Day this year.  Since we're less than 8 weeks away from the birth of our baby girl, I decided to make survival kits for him.  I decided on two, one for the hospital and another for home.  The hospital one is filled with all his favorite candy, soda and snacks.  The Daddy Survival Kit is more meaningful with specific items and sayings to go with (sayings can be found below).  I also bought him the diaper bag that he wanted.  He was completely surprised and loved all his gifts.  Now the challenge will be not eating all the candy before we head to the hospital! 
*affiliate links used in this post*






PRINTABLE SURVIVAL KIT NOW AVAILABLE
CLICK HERE FOR BABY GIRL
CLICK HERE FOR BABY BOY





Monday, June 11, 2012

Baby Name Blocks









                                                                                                                                                                      I've seen these cute blocks all over Pinterest and Etsy recently and decided to make them for AG's nursery.  I didn't take pictures as I was making them and totally regret it.  So sorry!  But, they were really easy and hopefully the directions will be simple to follow.  If you have ANY questions about how to make them, let me know.  I am happy with how they turned out and am hoping to also use them in our maternity pictures tonight! 

Materials:
wooden blocks (hobby lobby about 2 inches)
coordinating scrapbook paper
Mod Podge
letters (I used my cricut to cut them, you can do stickers or store bought paper letters)
paint brush
paint

Directions:
1.  Paint the wooden blocks.  I decided to paint them all pink and grey.  Although, about half way through I had wished I did light pink for all sides.  Make sure all sides are painted, you may need a few coats for good coverage.
2.  Using your scrapbook paper, cut out squares to go on the wood. Trace the squares on paper and cut the scrapbook paper a little smaller then the wood (I actually used my cricut for the cutting).  Make sure you know how many pieces of each paper to use.  I used 5 coordinating pieces.
3.  Once the paint is dry, it's time to put the scrapbook paper on.  Paint a little Mod Podge on the painted wood square.  Then adhere the scrapbook paper on top.  Smooth it out so that there aren't any bumps.  Do this with all sides of all the squares.  This will be a process because you will have to wait for a few sides to dry before moving on.
3.  Time for the letters.  Whether you're using stickers or paper letters, make sure they are cut and ready to go.  Brush another coat of Mod Podge on top of the newly adhered scrap paper.  Place the letter on top of the Mod Podge.  Make sure you press it down all the way and smooth them out.  Do this for all of the letters for the child's name.  **Pay attention to where you are putting the letters.  I didn't plan mine out well enough and ended up with two polka dot papers for the last two letters, which I had to go back and fix.
4.  The last step is another coat of Mod Podge.  Make sure the coat under the letters is completely dry.  This final coat is to seal everything.  Let the blocks dry and then enjoy!  These would make a great baby shower gift!


A few notes:
*Before you want anything to stick on, apply Mod Podge.  
*Always let the Mod Podge dry before you apply another coat or you will get a film. 
*Make sure you know exactly where you are going to glue the letters, make sure paper alternates, etc. 
*The wood doesn't have to be painted, but her furniture is white so I didn't want to leave the wood.  
*You can cut the scrap paper to be the exact size of the blocks so you don't have to paint the wood and there would be no wood showing.  




Wednesday, June 6, 2012

Lamp Shade Revamp

Before

After



I was thrilled when I found this bright pink lamp for Avery’s nursery at Target.  It matched perfectly with the colors but to me needed a little something extra.  So, I decided to put a bow around the lamp shade to make it more “girly” and also to tie in the different pinks around her room.  I’ve been making bows for a year and a half now, so this was a quick and easy project for me.  If you haven’t made a bow before, here is a link to a great tutorial site.  You’ll be amazed at how easy they are!

Step 1: Measure around your lamp shade, cut your ribbon an inch longer then the measurement. Put that piece to the side.

Step 2:  Using the same ribbon you’re putting around the lamp, make your bow (cut another piece).  The size is up to you.  I wanted something big enough to stand out but didn’t want the entire lamp covered.  Make the bow, but wait to put the center knot on.

Step 3:  Sew (or hot glue) the bow to the middle of the first piece of ribbon (which will go around the lamp).  I folded my ribbon in half first and put a dot of glue in the middle.  Then, I placed the  unfinished bow on the glue. Next, take a piece of string and wrap it around the center of the bow and the ribbon.  This will scrunch the ribbon and bow together, which is what you want.

Step 4: Add your center piece of ribbon, I made a knot.  I hot glued the knot to the front of the bow and wrapped it around the back of your scrunched piece.

Step 5: Hot glue the ends of the ribbon together.  This will make your ribbon into a circle, which will go around the lamp shade.

Step 6:  Carefully slide the bow and ribbon onto the lamp shade and position to your liking.

Enjoy!



**Pictures will help so much, I am working on another one and will post pictures ASAP!

Blog Design by Get Polished