Friday, June 29, 2012

DIY Bow Board

Here is another project from Avery's nursery.  I already made a bow holder, but that didn't fit all of the flowers and bows she has.  So, I decided to make a bow board to hang on the back of her bedroom door.  

Materials:
1 canvas (mine was 16x20)
Fabric to cover canvas
staple gun
ribbon
spray adhesive
Fabric Pen


Directions: 
I started with my canvas and fabric. 


I ironed my fabric to get all of the creases out. 



Next, I laid my fabric on the ground and put the canvas on top.  




I left about 1 1/2 to 2 inches around all of the sides of the canvas and cut the extra fabric. 





Then, get your spray adhesive and spray the entire canvas front with it.  





Place your fabric on top of the canvas.  Smooth out any bumps or lines. 



Next, use your staple gun to staple the fabric on the back of the canvas.  I made sure to pull tight enough to keep the fabric smooth.  Continue doing that around all four sides of the canvas. 



Now, your board is done.  All you need to do now is create a place to hang the bows.  



I measured the length of my canvas (after deciding which way I wanted it to hang on the door).  



I marked the distance I wanted to put each piece of ribbon.  I think I did mine about 3 inches apart.  The mark below is the width of the ribbon, so I knew exactly where to put it. 



Cut the amount of ribbon you'll need.  I measured mine about 18 inches and cut 5 pieces.

After that, staple the ribbon to the back of the canvas on both ends.  



Trim off any excess ribbon or fabric.  



Ta da- you have your bow board.  You can hang it with ribbon or place it on hooks, like I did.  

Fill it with bows and you're good to go! 








Tuesday, June 26, 2012

DIY Fabric Pom Poms

After spending lots of time working on Avery's nursery, things were finally coming together.  The room was painted, the crib was set up, the decorations were coming in. One of my last DIY projects were these fabric pom poms.  Of course, these were Pinspired.  But most of the tutorials used lanterns and hot glue.  I couldn't imagine hot gluing every one of the fabric circles into these balls, so I tried it a different way.  I used styrofoam balls as my base and pinned in the fabric.  It was a simple but LONG process.  Now that it's said and done, I would spend countless hours making these again.  They really bring the nursery together, they are without a doubt my favorite project in her room.  


Materials: 
Styrofoam Balls (I used 6 inch for the light pink and 8 inch for the dark pink
Fabric (about 4 yards for the 2 light pink and 3 yards for the dark pink)
Lots and lots of sewing pins (I used over 500)
Ribbon
Scissors
Fabric Pen

Directions: 
1. Iron fabric to get all of the creases out. This is optional, but it makes the tracing and cutting much easier.  

2.  Trace your circles.  I used a spool of ribbon as my tracer and a disappearing fabric marker to make the circles.  


3.  Cut out the circles.  I had to take breaks while doing this.  I did a yard at a time.  


4.  To make the puffy circles for the poms, first fold the circle in half.  


5.  Then fold the fabric in half one more time.  


6.  Now, take a sewing pin and put it through the corner of the fabric.  



7.  Pin it into the styrofoam ball.  Once it's in, fluff it out a bit.  I pinned them in groups of 4 to make sure the area was covered and all pieces were fluffed out.  




8.  Continue until the entire ball is covered.  It took me about 3 nights to finish all of the balls.  I probably spent 2-3 hours each night working on them.  




To hang them up, I just used grossgrain ribbon, sewing pins and a tack. I cut the ribbon the length I wanted to hang them from the ceiling.  Then I pinned one end of the ribbon into the styrofoam, I used about 10 pins to keep it in.  Then, I took a clear tack and stuck it into the ceiling.  I used 2 tacks for the bigger ball.  I will probably switch to nails eventually, but I did this on my own and didn't want to be 8 months pregnant, standing on a chair trying to hammer something into the ceiling.  I already caught enough flack for putting them up myself with tacks.  



Do you like this project?  Share it with your friends! 






Thursday, June 21, 2012

Daddy Survival Kit & Hospital Survival Kit

I wanted to do something special for hubs for Father's Day this year.  Since we're less than 8 weeks away from the birth of our baby girl, I decided to make survival kits for him.  I decided on two, one for the hospital and another for home.  The hospital one is filled with all his favorite candy, soda and snacks.  The Daddy Survival Kit is more meaningful with specific items and sayings to go with (sayings can be found below).  I also bought him the diaper bag that he wanted.  He was completely surprised and loved all his gifts.  Now the challenge will be not eating all the candy before we head to the hospital! 
*affiliate links used in this post*






PRINTABLE SURVIVAL KIT NOW AVAILABLE
CLICK HERE FOR BABY GIRL
CLICK HERE FOR BABY BOY





Tuesday, June 19, 2012

Father's Day Grandpa Frame




Thanks so Pinterest, I found a really cute Grandpa saying/quote that I wanted to use for Father's Day.  It was on a home made card, but I thought it would be perfect on a frame for my dad.  

I started out with a plain wood frame.  I found it for $1 at Michaels.  From there I found one piece of scrapbook paper that I thought would match his office.  

First, I painted the back of the wood frame and sides brown.  I used an acrylic paint.  

Once the paint was dry, I traced the frame onto the scrapbook paper.  I did the outside first and then the middle.  



After that, I used Mod Podge to adhere the scrapbook paper to the frame.  One thin coat is all I used on the wood.  Use something stiff to run over the scrapbook paper to make sure there aren't any bumps in the paper from the Mod Podge.  


Next, seal the frame with Mod Podge.  Make sure to cover the sides, front and back of the frame.  


I used 1 coat on the entire thing before I put the letters on.  


The last step is the letters.  You can use stickers, a paint pen or paper.  I used my Cricut to cut cardstock paper letters.  Line up the letters to make sure everything fits.  My letters were an inch on the top and 1.25 inches for Grandpa.  In order to adhere the letters to the frame, you'll need more Mod Podge.  

Paint a thin coat ontop of the scrap paper (again) and place the letters on.  Make sure they are straight and lined up in the right place.  Do this for all the letters/ saying.  Let dry.  

Finally, put another coat of Mod Podge over the entire frame and let it dry.  


Give your gift to a very deserving grandpa! 




Friday, June 15, 2012

Peanut Butter Cup Brownies



After making the Kit Kat brownies a few weeks back, hubs requested Peanut Butter Cup brownies.  So this week I gave them a try.  They were simple to make, especially since I used the boxed brownie mix. Hubs and I had them for dessert on Sunday night and they were absolutely divine.  I immediately packaged them up and sent them to work with hubs the next day, or else I would have had a large weight gain this week at the DR! When I talked to him at work the next day he said they were gone in minutes and people requested 9 batches of them.  To say these were a hit is an understatement!   


All you need is brownie mix (9x13) and 2 packages of king size peanut butter cups. 


Prepare the brownie mix according to the directions on the package.  Pour HALF of the mix into a greased pan, just enough to cover the bottom. 


Open the candy and cut each one into 4 pieces. 


Place the pieces on top of the brownie mix.  I tried to place them so that there would be candy in every bite. 


Pour the rest of the brownie mix on top.  Make sure to cover the candy completely. 

Bake for about 18 minutes or as long as is directed on the box.  Le them cool before you cut them & enjoy! 


You could also use the new mini candy pieces sold in the bags but I am not going to change this recipe one bit.  They were perfect they way they were!




Tuesday, June 12, 2012

Raspberry Lime Water


I've been craving fruit water recently.  With the high temperatures and wanting something sweet, it seems to be the perfect solution.  The first one I tried was raspberry and lime.  I used a carton of raspberries and two limes.  It was a little too sour for me, so next time I'll just use one lime.  

Have you tried any fruit water recipes, if so please share your favorites! 


Monday, June 11, 2012

Baby Name Blocks









                                                                                                                                                                      I've seen these cute blocks all over Pinterest and Etsy recently and decided to make them for AG's nursery.  I didn't take pictures as I was making them and totally regret it.  So sorry!  But, they were really easy and hopefully the directions will be simple to follow.  If you have ANY questions about how to make them, let me know.  I am happy with how they turned out and am hoping to also use them in our maternity pictures tonight! 

Materials:
wooden blocks (hobby lobby about 2 inches)
coordinating scrapbook paper
Mod Podge
letters (I used my cricut to cut them, you can do stickers or store bought paper letters)
paint brush
paint

Directions:
1.  Paint the wooden blocks.  I decided to paint them all pink and grey.  Although, about half way through I had wished I did light pink for all sides.  Make sure all sides are painted, you may need a few coats for good coverage.
2.  Using your scrapbook paper, cut out squares to go on the wood. Trace the squares on paper and cut the scrapbook paper a little smaller then the wood (I actually used my cricut for the cutting).  Make sure you know how many pieces of each paper to use.  I used 5 coordinating pieces.
3.  Once the paint is dry, it's time to put the scrapbook paper on.  Paint a little Mod Podge on the painted wood square.  Then adhere the scrapbook paper on top.  Smooth it out so that there aren't any bumps.  Do this with all sides of all the squares.  This will be a process because you will have to wait for a few sides to dry before moving on.
3.  Time for the letters.  Whether you're using stickers or paper letters, make sure they are cut and ready to go.  Brush another coat of Mod Podge on top of the newly adhered scrap paper.  Place the letter on top of the Mod Podge.  Make sure you press it down all the way and smooth them out.  Do this for all of the letters for the child's name.  **Pay attention to where you are putting the letters.  I didn't plan mine out well enough and ended up with two polka dot papers for the last two letters, which I had to go back and fix.
4.  The last step is another coat of Mod Podge.  Make sure the coat under the letters is completely dry.  This final coat is to seal everything.  Let the blocks dry and then enjoy!  These would make a great baby shower gift!


A few notes:
*Before you want anything to stick on, apply Mod Podge.  
*Always let the Mod Podge dry before you apply another coat or you will get a film. 
*Make sure you know exactly where you are going to glue the letters, make sure paper alternates, etc. 
*The wood doesn't have to be painted, but her furniture is white so I didn't want to leave the wood.  
*You can cut the scrap paper to be the exact size of the blocks so you don't have to paint the wood and there would be no wood showing.  




Thursday, June 7, 2012

End of the Year Gifts

Summer is here! Well, as of 12:00 tomorrow it is.  It's been another great year in the classroom, but I'm ready for the summer and for my little one to make her arrival in August.
  I wanted something cute and easy for gifts for my students and homeroom parents.  Of course, I turned to Pinterest for a little pinspiration.  Here are a few things I came up with based on some neat things I found.  
Happy Summer!!

Since our classroom theme this year was All Stars, I decided on this little gift for my students. 

These cups and goodies were part of the gift for my homeroom moms.  




HERE is the link to download the parent gifts.  

HERE is the link to download the end of year student gift.  

Wednesday, June 6, 2012

Lamp Shade Revamp

Before

After



I was thrilled when I found this bright pink lamp for Avery’s nursery at Target.  It matched perfectly with the colors but to me needed a little something extra.  So, I decided to put a bow around the lamp shade to make it more “girly” and also to tie in the different pinks around her room.  I’ve been making bows for a year and a half now, so this was a quick and easy project for me.  If you haven’t made a bow before, here is a link to a great tutorial site.  You’ll be amazed at how easy they are!

Step 1: Measure around your lamp shade, cut your ribbon an inch longer then the measurement. Put that piece to the side.

Step 2:  Using the same ribbon you’re putting around the lamp, make your bow (cut another piece).  The size is up to you.  I wanted something big enough to stand out but didn’t want the entire lamp covered.  Make the bow, but wait to put the center knot on.

Step 3:  Sew (or hot glue) the bow to the middle of the first piece of ribbon (which will go around the lamp).  I folded my ribbon in half first and put a dot of glue in the middle.  Then, I placed the  unfinished bow on the glue. Next, take a piece of string and wrap it around the center of the bow and the ribbon.  This will scrunch the ribbon and bow together, which is what you want.

Step 4: Add your center piece of ribbon, I made a knot.  I hot glued the knot to the front of the bow and wrapped it around the back of your scrunched piece.

Step 5: Hot glue the ends of the ribbon together.  This will make your ribbon into a circle, which will go around the lamp shade.

Step 6:  Carefully slide the bow and ribbon onto the lamp shade and position to your liking.

Enjoy!



**Pictures will help so much, I am working on another one and will post pictures ASAP!

Tuesday, June 5, 2012

Mod Podge Scrapbook Wall Letters

One thing I knew from the day I found out I was pregnant was that I was going to make his/her name to hang on the wall.  I’ve seen it all over Pinterest and in many of my friends homes.  I love how it looks, especially above the crib.  When we found out our little one was a girl, I knew exactly what I wanted to do for the nursery.  I wanted a grey and white room with pink accents.  We decided on one wall of horizontal stripes at the focal point for the room, it would also be the wall the crib was in front of. 
 As soon as that was finished, I began working on her name for the wall.  It took weeks for me finish this project.  I had to make sure to get the letters I wanted, then came the paper that had to match the nursery, from there we needed to figure out how we wanted to hang them (which I left up to hubs to decide).  I personally think they are the perfect addition to our little one’s nursery, but I’m a little partial =-)

Here is how to make them.  
Materials:
Wooden letters (I found mine at Hobby Lobby)


Scrapbook Paper
Acrylic paint that matches
Mod Podge
Hot Glue
Ribbon
Scissors


Directions: 

  1. Paint the outside and the edges of your letters.  I only did one coat although, it could have used two.  I knew it wouldn’t be obvious to see from far a  away and I honestly didn’t want to take the time to do it.  
2. Trace the letter on scrapbook paper.  Make sure you decide which paper you want to use for which letter.  I used three different pieces of paper for this project.  When you trace the letter, flip It over and make sure you’re tracing it to the decorated side of the paper matches the top of the letter.                                        
3. Cut out the letters.  Do this as carefully as you can so that it matches the letters perfectly,
4. Put Mod Podge on the top of the letter.  Just enough to adhere the scrapbook paper.  After a thin coat of mod podge, place the scrapbook paper on top.  Press it down so that there aren’t any bubbles or raised edges.  
5. After that is dry, apply a layer of Mod Podge to the entire top and sides of the letter.  The back doesn’t matter because it won’t be visible.  
6. Now you’re ready to hang it up.  I decided to glue ribbon to the back and hang the ribbon off of very thin nails in the wall. I put hubs in charge of the leveling and hanging.  

There are so many things you can do with these letters from monograms in your living room to baby shower decorations to door hangers.  The possibilities are endless, ENJOY!










Monday, June 4, 2012

Festive Fruit Pizza





Looking for a fun and different dessert this 4th of July?  Look no further!  Try a fruit pizza.  They're easy to make and you get to choose the toppings.  This one was made for Memorial Day  few weeks ago. Enjoy!


Ingredients:
blueberries- about a cup
strawberries- sliced just over a cup
sugar cookie dough
whipped vanilla frosting


Directions:
I used refrigerated sugar cookie dough and pressed it out on a round cookie sheet.  Make it as even as possible so it can cook evenly.  Bake for time directed on package or until crust is cooked.  Let it cool.  Once it's cooled, frost it with the icing.  To top it off, add your choice of fresh fruit.  Transfer to s serving plate and slice just before serving.  I don't recommend adding the fruit too long before serving, the juices will start running and it can become messy.  

Monday, May 28, 2012

DIY Bow Holder






I started making bow holders about a year and a half ago when I found out one of my best friends was having a baby girl.  They soon became the perfect gift to give expectant mothers along with some handmade bows.  Now that I’m having a little girl of my own, I’ve been on a mission to create different things to match her nursery.  One of the first projects on my list was a bow holder.  I didn’t want to do the typical monogram because the space I planned on hanging it was pretty big.  So, I decided to do a framed monogram look. I love how it turned out and even more now that it’s filled with bows.  The only thing I need is a little princess to put them on!

Materials:
1 square wood frame (mine was from Hobby Lobby, but can be found at most craft stores).
1 monogram letter to go on the top.  Make sure it’s not too much smaller than the frame and definitely not bigger.  (Michaels is where I found mine).
Acrylic Paint to match the nursery or color scheme you’re going for
Matching Ribbon (Grossgrain is preferred, bows slip off the rest)
Hot Glue
Mod Podge


Directions:

Paint the wood frame the color of your choice.  Here is where you can be as creative as you wish.  Think of fun patterns or keep it simple.  It’s up to you.  
After the wood frame is painted, brush over it with a layer or two of Mod Podge.  Make sure to get the sides as well, they will be visible.  
After the Mod Podge is dry, hot glue the monogram to the frame.  My “A” already came white, or else I would have painted and sealed it first.  
To finish it off, hot glue a ribbon loop to the top of the frame.  I used about 8 inches for the loop and glued a bow I made to the tippy top for an added touch.  
Lastly, using more matching ribbon, glue about 20 inches to the bottom of the holder.  I usually glue it in a loop and cut it at the bottom to create two straight lines of ribbon, which leaves two places to hang bows.  A final touch is to seal the ends with heat from a lighter. 



If you have any questions, let me know.  If you make a holder of your own, please share!

Thursday, May 24, 2012

Broccoli, Grape and Pasta Salad



This recipe was another Pinterst find.  I made this salad for our Mother's Day cook out.  I knew it would be the perfect pair for juicy burgers and baked beans.  I made the dressing while the pasta was cooking.  I will admit, that I wasn’t completely sold on the dressing after it was finished.  It was a little too strong for my liking (vinegar wise).  But, I left it alone and continued to follow the directions.  I used all the ingredients besides the red onions and bacon. I mixed everything up (according to directions) and  left it in the refrigerator for only 2 hours.  Of course I taste tested it before I served it to my family and I was pleasantly surprised.  The dressing wasn’t as strong and provided the perfect amount of sweetness and tang for the salad.  I had the leftovers for lunch the rest of the week and it was just as good. It won't be long before I make this meal again.  Enjoy!


Broccoli, Grape and Pasta Salad 
Courtesy of My Recipes 
Ingredients

1 cup chopped pecans
1/2 (16-oz.) package farfalle (bow-tie) pasta
1 pound fresh broccoli
1 cup mayonnaise
1/3 cup sugar
1/3 cup diced red onion
1/3 cup red wine vinegar
1 teaspoon salt
2 cups seedless red grapes, halved
8 cooked bacon slices, crumbled




Preparation

1. Preheat oven to 350°. Bake
pecans in a single layer in a shallow pan 5 to 7 minutes or until lightly toasted and fragrant, stirring halfway through.
2. Prepare pasta according to package directions.
3. Meanwhile, cut broccoli florets from stems, and separate florets into small pieces using tip of a paring knife. Peel away tough outer layer of stems, and finely chop stems.
4. Whisk together mayonnaise and next 4 ingredients in a large bowl; add broccoli, hot cooked pasta, and grapes, and stir to coat. Cover and chill 3 hours. Stir bacon and pecans into salad just before serving.

Blog Design by Get Polished